ACC - READERS
Affordable quality Access Control Readers
supporting MiFare Classic and Desfire cards in 8HR10D format
FE-MF-WR
FE-MF-WR
Wiegand Access Control Reader
Access Control reader that fulfils your whole Access Control Solutions. These readers are with modern design and basic IP65 weatherproof
At first glance:
- RFID card type: Mifare (13.56 MHz)
- Reading range: 5 - 10cm
- Time for card verification: 100ms
- Power consumption: avg. 60mA
- Communication: Wiegand/OSDP
- LED indicator: YES
- Transmit distance: 100 meters
- Power requirement: 9 ~ 24VDC (200mA)
- Operating Temperature: 0°C ~ 55°C
- Operating Humidity: 5% ~ 80%
- Built-in transceiver / receiver, watch dog
- IP65 Weather Proof, reader anti-collision, self-diagnostic, surge protection, buzzer
- Dimension: 84.2 x 93.7 x 20mm
- Cable length: 2m
- Weight: 95g
- Supporting both MiFare Classic and Desfire cards
- Supporting 8HR10D format
- Specification
FE-MF-TWR
Wiegand Access Control Reader With Keypad
Access Control reader that fulfils your whole Access Control Solutions. These readers are with modern design and basic IP65 weatherproof
At first glance:
- RFID card type: Mifare (13.56 MHz)
- Reading range: 5 - 10cm
- Time for card verification: 100ms
- Power consumption: avg. 80mA
- Communication: Wiegand/OSDP
- LED indicator: YES
- Transmit distance: 100 meters
- Power requirement: 9 ~ 24VDC (200mA)
- Operating Temperature: 0°C ~ 55°C
- Operating Humidity: 5% ~ 80%
- Built-in transceiver / receiver, watch dog
- IP65 Weather Proof, reader anti-collision, self-diagnostic, surge protection, buzzer
- Dimension: 84.2 x 93.7 x 20mm
- Cable length: 2m
- Weight: 95g
- Supporting both MiFare Classic and Desfire cards
- Supporting 8HR10D format
- Specification
FE-MF-TWR
FE-MF-WRL1
FE-MF-WRL1
Wiegand Access Control Reader compatible with IP-INTEGRA controllers.
At a first glance:
- RFID Card type: 13.56 MHZ Mifare card
- IP66 Water proof
- Output format: Wiegand-34
- Reading range: 3 - 6cm
- Operating Temperature: -30°C ~ 70°C
- Operating Humidity: 0% ~ 98%
- Integrated buzzer output
- Built-in LDR (Light dependent resistor) for anti-tamper
- Easy on door installation
- Dimensions: 110 x 50 x 22 mm
- Cable length: 3m
- Operating voltage: 12V DC
- Specification
FE-MF-WRL2
Wiegand Access Control Reader compatible with IP-INTEGRA controllers.
At a first glance:
- Card type: 13.56 MHZ Mifare card
- IP66 waterproof
- Output format: Wiegand-34
- Reading range: 3-6cm
- Operating Temperature: -30°C ~ 70°C
- Operating Humidity: 0% ~ 98%
- Integrated buzzer output
- Built-in LDR (Light dependent resistor) for anti-tamper
- Easy on door installation
- Dimensions: 86 x 86 x 22 mm
- Cable length: 3m
- Operating voltage: 12V DC
- Specification
FE-MF-WRVL2
FE-MF-WRV1
FE-MF-WRV1
Resistant anti-vandal MIFARE keypad and card reader compatible with IP-INTEGRA controllers.
At a first glance:
- Card type: 13.56 MHz MIFARE
- IP67 waterproof
- Output format: Wiegand-34
- Operating Temperature: -40°C ~ 70°C
- Operating Humidity: -10% ~ 90%
- External LED/Buzzer control lines
- Highly visible blue backlit keypad
- Multi-color LED status display
- Case sensor detection function to enhance the system security
- Wide range of operating temperature to meet the extreme environment conditions
- Working voltage: 12VDC
- Outdoor/indoor application
- Dimensions: 129 x 44 x 20 mm
- Cable length: 3m
- Easy installation
- Specification
FE-MF-WRV2
Resistant anti-vandal MIFARE card reader compatible with IP-INTEGRA controllers in fashionable slim design
At a first glance:
- Card type: 13.56 MHz MIFARE
- IP67 waterproof
- Output format: Wiegand-34/26
- Operating Temperature: -40°C ~ 70°C
- Operating Humidity: -10% ~ 90%
- External LED/Buzzer control lines
- Multi-color LED status display
- Case sensor detection function to enhance the system security
- Wide range of operating temperature to meet the extreme environment conditions
- Working voltage: 12VDC
- Outdoor/indoor application
- Dimensions: 100 x 43 x 20 mm
- Cable length: 3m
- Easy installation
- Specification
FE-MF-WRV2
FE-MF-FRW1
FE-MF-FRW1
IP-INTEGRA ACC solution with FERMAX Skyline Intercom systems
Access Control reader that fulfils your whole Access Control Solutions. These readers are with modern design and support Wiegand 34 and OSDP.
At first glance:
- RFID card type: Mifare (13.56 MHz)
- Reading range: 5 cm
- Power consumption: up to 45 mA
- Power consumption when idle: up to 24 mA
- Communication: Wiegand/OSDP
- Transmit distance: 100 meters
- Operating voltage:12V DC
- Operating Temperature: 0°C ~ 55°C
- Operating Humidity: 0% ~ 98%
- IP 54 Weather Proof
- Dimension: 105.2 x 47.5 mm
- Weight: 95g
- Supporting 8HR10D format
- Specification
FE-MF-FRW1-PCBA
IP-INTEGRA ACC reader solution
Access Control reader that fulfils your whole Access Control Solutions. These readers support Wiegand 34 and OSDP.
At first glance:
- RFID card type: Mifare (13.56 MHz)
- Reading range: 5 cm
- Power consumption: up to 45 mA
- Power consumption when idle: up to 24 mA
- Communication: Wiegand/OSDP
- Transmit distance: 100 meters
- Operating voltage:12V DC
- Operating Temperature: 0°C ~ 55°C
- Operating Humidity: 0% ~ 98%
- Dimension: 105.2 x 47.5 mm
- Weight: 95g
- Supporting 8HR10D format
- Specification
- Antenna Part List
- Antenna Specification
FE-MF-FRW1-PCBA
FE-13M56-R1
FE-13M56-R1
13.56Mhz Portable Card issuing USB reader compatible with IP-INTEGRA controllers
At first glance:
- Support: 13.56Mhz(MF/S50/Ntag203)
- Operation system: Windows, LINUX, Android
- Read distance: 0~80MM
- Size: 74 x 19 x 6 mm
- Communication: USB
FE-13M56-R2
13.56Mhz Desk top Card issuing USB reader compatible with IP-INTEGRA controllers
At a first glance:
- Support: 13.56Mhz(MF/S50/Ntag203)
- Operation system: Windows, LINUX, Android
- Read distance: 0~80MM
- Size: 103 x 68 x 11 mm
- Communication: USB
FE-13M56-R2
