- Do You Have A Question
- +45 66162414
- [email protected]
FE-INT1-PS
Micro USB power supply
• 2.5 A 5.1 V power supply for FE-NANO-SIP or FE-INT1-SIPD
• 1.5 m cable
• Protections: short-circuit /over-load/ over-voltage
• Short circuit, over-current and over-voltage protection
• Low standby current consumption
• Class II double insulated
• ERP level 6 efficiency rating
The power supply is an integrated cable and microUSB plug. There are also four interchangeable mains adaptors — you can use the PSU in the UK, Europe, Australia and the United States. Designed to run small USB powered computers. Cable is attached directly to the actual power supply. Compatible with Raspberry Pi B+, Pi 2 and any other product that requires power via a micro USB connector. Do NOT use as phone charger!
| Weight | 0.5 kg |
|---|
Specification
Output
Output Voltage: +5.1Vdc
Minimum Load Current: 0A
Nominal Load Current: 2.5A
Nominal Output Power: 13W
Output Regulation: +/-5%
Line Regulation: +/-2%
Ripple & Noise: 120mVp-p Maximum
Rise Time: 100mS Maximum at nominal input
Turn-on Delay: 3 Seconds Maximum at nominal input
Protection: Short circuit, over current, over voltage
Efficiency: 80.86%
Output Cable: 1500mm Micro USB B 5 Pin
Output Voltage: +5.1Vdc
Minimum Load Current: 0A
Nominal Load Current: 2.5A
Nominal Output Power: 13W
Output Regulation: +/-5%
Line Regulation: +/-2%
Ripple & Noise: 120mVp-p Maximum
Rise Time: 100mS Maximum at nominal input
Turn-on Delay: 3 Seconds Maximum at nominal input
Protection: Short circuit, over current, over voltage
Efficiency: 80.86%
Output Cable: 1500mm Micro USB B 5 Pin
Input
Input Voltage Range: 90-264VAC
Input Frequency: 47-63Hz
Input Current: 0.5A Max
Inrush Current: No damage and IP fuse will not blow
AC Inlet: UK, Euro, Aus & US changeable heads
Others
Dimensions: 73.2 (L) * 45.1 (W) * 35.1 (H) mm
Weight: Approx 150g
Operating Temp.: 0 °C to 40 °C
Storage Temp.: -20 °C to +60 °C
Operating Humidity: 20 ~ 85 % RH. Non-Condensing
MTBF: 50,000 Hours
Input Voltage Range: 90-264VAC
Input Frequency: 47-63Hz
Input Current: 0.5A Max
Inrush Current: No damage and IP fuse will not blow
AC Inlet: UK, Euro, Aus & US changeable heads
Others
Dimensions: 73.2 (L) * 45.1 (W) * 35.1 (H) mm
Weight: Approx 150g
Operating Temp.: 0 °C to 40 °C
Storage Temp.: -20 °C to +60 °C
Operating Humidity: 20 ~ 85 % RH. Non-Condensing
MTBF: 50,000 Hours
